The difference between ring main unit and switchgear

Apr 08, 2022

The switchgear is divided into two types: high and low voltage. High voltage includes ring main unit, middle cabinet, &1A, etc. There are also many types of ring main units.

The ring main unit means that each power distribution sub-bureau has a switch cabinet (outgoing switch cabinet), and the busbar of this switch cabinet is also a part of the ring trunk. That is, the cylinder is made up of the busbars of each outlet cabinet. Each outlet cabinet is called a "ring main unit".

In fact, if you take out a ring main unit alone, you cannot see the meaning of "ring network". These ring main units are not large, so the high-voltage switch of the ring main unit generally does not use a circuit breaker with a complex structure, but a high-voltage load switch with a simple structure and a high-voltage fuse.

That is to say, the high-voltage switch in the ring cabinet is generally a load switch. The circuit cabinet uses a load switch to operate the normal current and a fuse to remove the short circuit current. The two combine to replace circuit breakers. Of course, this can only be limited to a certain capacity.